Skip to content

Northern Colorado

Schedule service
KestrelPlumbing

Drains & sewer

Hydro-jetting

Hydro-jetting sends high-pressure water through a drain or sewer line to scour grease, scale, sludge and fine roots off the pipe walls. It cleans the full diameter of the pipe rather than boring a hole through the blockage, which makes repeat clogs less likely.

Typical time
One to three hours.
Repair or replace
Jet sound pipe; repair damaged pipe.

Step 1 of 3 · Free, no obligation

What happened?

What happened?
Is water getting into the house?

Cable machines are fine for most single clogs. Jetting is better for grease-heavy kitchen lines, restaurant drains and root-infested sewer lines after the roots have been cut.

A camera inspection before jetting confirms the pipe is sound enough; badly cracked clay or collapsed lines need repair, not jetting.

Hydro-Jetting at a glance

What it is
Hydro-jetting sends high-pressure water through a drain or sewer line to scour grease, scale, sludge and fine roots off the pipe walls.
Service category
Drain & Sewer Services

Signs you need hydro-jetting help

  • Repeat clogs every few months
  • Grease buildup in kitchen lines
  • Roots found on camera
  • Slow main line after cabling

Quick answers

Hydro-Jetting: the short version

How long hydro-jetting takes

One to three hours.

When hydro-jetting can wait, and when it can't

Scheduled; same day for backups.

Fix or replace hydro-jetting?

Jet sound pipe; repair damaged pipe.

Why hydro-jetting happens

Grease, scale and roots.

The work

How hydro-jetting is done

  1. 1

    Camera first

    Confirm pipe condition.

  2. 2

    Jet

    Nozzle chosen for grease, scale or roots.

  3. 3

    Camera after

    Verify a clean line.

What moves the price of hydro-jetting

Driven by line length, access and buildup.

  • Line length and diameter
  • Access
  • Severity of buildup
  • Camera inspection

Hydro-Jetting: common questions

Can hydro-jetting damage pipes?

On sound pipe it's safe; on cracked or collapsed pipe it can make damage worse, which is why a camera inspection comes first.

How often should a main line be jetted?

Only as needed. Lines with recurring roots may benefit from maintenance every one to two years until repaired.

Service area

Hydro-Jetting across Northern Colorado

Call about hydro-jetting

Grease, scale and roots.

Call nowSchedule service